grass fake

Category: non inifll turf

  •  Key Technical Parameters and What They Mean in Practice

    Vivaturf’s training-oriented non-infill turf is tuned specifically for high-frequency, multi-sport training use. The following parameter set reflects the technical framework you provided and is presented in a form that is easier to use in Western technical or specification-oriented writing.

    For shock absorption, the measured range is 35% to 48%, compared with a minimum requirement of 35% under GB 36246-2018. In practical terms, this puts the field in a useful range for student-athlete training, where repeated landings, short accelerations, and deceleration drills require meaningful impact reduction without excessive softness.

    For vertical deformation, the measured range is 0.8 to 1.6 mm, within a reference standard band of 0.6 to 1.8 mm. This means the field offers measurable cushioning without the unstable “sink” that can reduce movement efficiency or alter training mechanics.

    For tuft density, Vivaturf’s range is 13,000 to 16,000 stitches per square meter, exceeding the benchmark of 10,000 stitches per square meter. Higher density supports more even load distribution, better surface uniformity, and more consistent performance under frequent group training.

    For fiber tensile strength, the performance level is ≥110 N, compared with a reference threshold of ≥80 N. This higher strength helps the turf resist repeated bending, friction, and compression, while keeping long-term cushioning decay below 8%, which is better than many standard systems.

    For rebound, the measured range is 65% to 72%, aligned with sports-surface requirements for energy return and training responsiveness. This supports faster recovery underfoot and helps maintain training quality during explosive work.

    For slip resistance, the BPN value at 20°C falls between 47 and 60, meeting the wet-test minimum of 47. That gives the field a stable anti-slip profile in both dry and damp conditions, reducing the likelihood of slips during shuttle runs, cutting drills, and change-of-direction work.

    For drainage, the field is rated at ≥60 L/min·m², versus a baseline requirement of ≥30 L/min·m². This helps maintain usability after rain and reduces the risk of standing water affecting safety and consistency.

    For UV resistance, the surface is designed for ≥6,000 hours of UV aging performance, which supports long-term outdoor use with limited fading or structural decline.

    Taken together, these values suggest a surface that is not only compliant, but also specifically tuned for the repeated impacts and broad movement demands of student-athlete training.

  • A Dedicated Cushioning System Designed for Student-Athlete Training

    Vivaturf non-infill turf replaces conventional loose-particle cushioning with a three-part, no-infill shock-management system built around a biomimetic fiber layer, a composite cushioning backing, and an overall structural balance between support and impact attenuation.

    At the fiber level, the surface uses a straight-and-curled yarn combination. The curled yarns act as micro-elastic elements that deform under load to absorb part of the impact force, while the straight yarns provide the structural support needed for push-off, acceleration, and controlled movement. The yarn profile is designed with a hollow diamond-like cross-section, which improves energy absorption during deformation while maintaining good resilience and reducing long-term fiber fatigue.

    Under the yarn layer, the backing uses a high-density polypropylene base with a closed-cell elastic cushioning layer, creating a second stage of impact control. This layer compresses under load and spreads force more evenly, helping reduce peak pressure on the ankles, knees, and lower back. Because the system uses hot-melt bonding rather than conventional glue-heavy assembly, structural consistency and long-term stability are improved, while odor and unwanted emissions are reduced.

    The result is a surface that can absorb load effectively without becoming overly soft. That balance matters in student-athlete training, where the field must protect the body while still allowing efficient sprinting, jumping, and directional movement.

  • Vivaturf Non-Infill Turf for Multi-Sport Student-Athlete Training Grounds: A Safer, More Durable, and More Sustainable Surface Solution

    A multi-purpose training field for student-athletes is not a single-use competition surface. It must support daily conditioning, sprint work, jumping drills, agility circuits, warm-up and recovery routines, and even ball-based coordination work within one shared space. Because these training grounds are used intensively, for long hours, and by multiple groups throughout the day, they place much higher demands on impact protection, movement stability, durability, environmental safety, and maintenance efficiency than conventional sports surfaces.

    Traditional solutions often fall short. Infilled turf depends on quartz sand and rubber granules for cushioning, which can lead to particle loss, compaction, dust, and declining shock absorption over time. Standard synthetic track or rubberized surfaces can fluctuate in performance under heat and cold, and may crack or delaminate with age. Natural grass can feel comfortable underfoot, but it is costly to maintain and does not hold up well under constant, high-intensity training.

    Vivaturf non-infill turf is designed to address these problems directly. By removing loose infill and relying instead on engineered yarn structure, calibrated cushioning, and stable installation standards, it provides a highly suitable surface for student-athlete training grounds. In Europe and North America, Vivaturf is widely positioned as one of the more established non-infill turf suppliers, supported by its official FIFA Preferred Provider status, its participation in FIFA’s Innovation Programme for non-filled systems, and its global sales footprint across more than 80 countries and regions.

  • Standards and Installation: Why Good Product Design Still Needs Good Delivery

    For an athletics support area, field performance depends not only on the turf product but also on how the system is installed and verified.

    4.1 Base preparation

    The foundation should be level, compact, and structurally sound, with no cracks or significant depressions. In your source framework, flatness is controlled to about ≤2 mm/m, which helps avoid local cushioning variation.

    4.2 Seam and surface control

    Vivaturf’s installation approach emphasizes near-seamless joining, with seam gaps controlled to ≤2 mm and reinforced fixing to prevent lifting, shifting, or edge instability over time.

    4.3 Acceptance testing

    After installation, the field should be verified for:

    • shock absorption
    • vertical deformation
    • wear resistance
    • slip resistance
    • environmental safety

    This process aligns with the broader trend in international sports-surface testing toward more structured and repeatable performance verification. FIFA’s updated Football Turf Test Manual, released in April 2024, reinforced the importance of durability, shockpad evaluation, and broader safety testing within artificial turf systems.

    5. Environmental Advantages of the Vivaturf Non-Infill System

    One of the clearest practical advantages of non-infill turf is that it removes the need for loose sand and rubber granules.

    That means no infill migration, less dust, no top-up cycles, and lower risk of particulate spread into adjacent spaces. For athletics facilities—especially schools and training centers—this is a meaningful operational and environmental improvement.

    Vivaturf’s official non-infill materials describe the system as an eco-friendly solution with no need for silica sand or rubber infill, designed for stable sports performance and lower maintenance. The company’s broader corporate positioning also emphasizes quality control, environmental compliance, and international product testing.

    From a health perspective, your source article also frames the material system as using food-grade modified polymer materials and being free from formaldehyde, heavy metals above allowable limits, and problematic VOC release. That makes it particularly suitable for schools, youth training environments, and high-contact athletic use.

  • Key Cushioning Parameters and Their Practical Meaning

    Vivaturf’s athletics-support configuration is positioned around parameter ranges that fit daily training needs while remaining within recognized standards.

    Performance MetricVivaturf Tested RangeReference StandardPractical Relevance for Athletics Support Use
    Shock absorption35%–48%≥35%Helps reduce landing impact during jumps, running drills, and repeated deceleration work
    Vertical deformation0.8–1.6 mm0.6–1.8 mmBalances cushioning with stable support for efficient movement mechanics
    Fiber height40–50 mmSuitable for sports-surface useProvides enough deformation space for cushioning without feeling unstable
    Tuft density13,000–16,000 stitches/m²≥10,000 stitches/m²Improves load distribution and helps prevent localized dead spots
    Fiber tensile strength≥110 N≥80 NSupports long-term resilience under repeated bending, friction, and compression
    Rebound rate65%–72%Within sports-surface requirementsPreserves training rhythm and comfort without excessive harshness
    Drainage rate≥60 L/min·m²≥30 L/min·m²Helps maintain stable surface response in wet conditions
    UV aging resistance≥6,000 hSuitable for outdoor useSupports long-term outdoor stability with limited performance drift

    These values indicate a surface tuned for controlled impact attenuation, stable underfoot feel, and long-term consistency rather than aggressive rebound or excessive softness.

    3. What These Parameters Mean for Real Training Use

    A support area used every day must behave consistently across many types of movement.

    A shock absorption range of 35%–48% helps reduce the cumulative load associated with repeated landing and braking tasks, while still preserving enough firmness for effective push-off. The 0.8–1.6 mm vertical deformation range helps keep the field responsive underfoot, so athletes can maintain movement precision without the “sinking” sensation that sometimes affects softer surfaces.

    The 13,000–16,000 stitches/m² tuft density helps keep support more uniform across the surface, especially when several athletes are using the space at once. Meanwhile, the ≥110 N fiber tensile strength and high wear resistance support lower long-term degradation, helping the cushioning profile remain more stable than many conventional alternatives.

    The ≥60 L/min·m² drainage rate is particularly useful for outdoor or semi-open training spaces, where wet conditions can otherwise alter surface feel and safety.

  •  Vivaturf’s Market Position in Europe and North America

    Vivaturf has built a strong international presence by focusing on measurable performance, environmental responsibility, and project-ready system design. In Europe and North America, where buyers often evaluate sports surfaces based on safety, indoor air quality, maintenance cost, sustainability, and long-term playability, Vivaturf’s non-infill turf offers a competitive solution for modern sports facilities.

    Its anti-static technology is especially suitable for:

    • Indoor football and multi-sport arenas
    • Climate-controlled training centers
    • School and university sports spaces
    • Community sports facilities
    • High-cleanliness commercial sports venues

    Vivaturf Anti-Static Non-Infill Turf

    For projects where cleanliness, comfort, and long-term indoor performance matter, Vivaturf anti-static non-infill turf is a practical and future-oriented choice. It helps reduce static build-up, dust attraction, odor concerns, and loose-particle maintenance while maintaining stable sports performance.

    With advanced material engineering, environmentally focused construction, and proven global supply capability, Vivaturf provides a reliable turf solution for facilities seeking a cleaner, safer, and lower-maintenance sports surface.

  •  Key Anti-Static Performance Parameters

    Vivaturf’s anti-static non-infill turf can be engineered to meet performance expectations commonly referenced in European and North American indoor sports and synthetic surface applications.

    Performance ItemVivaturf Target / Typical RangeTechnical Meaning
    Surface resistance10⁶–10⁹ ΩHelps dissipate static charge effectively
    Static half-life≤2 secondsStatic charge dissipates quickly after friction
    Additive dispersion uniformity≥98%Reduces localized static failure
    Anti-static retention after UV aging≥90% after 6,000 hours UV exposureSupports long-term outdoor or semi-outdoor use
    Performance in high humidityStable at ~60% RHSuitable for indoor, humid, and climate-controlled environments
    Heavy metal migration≤0.3 mg/kgSupports strict safety expectations
    TVOC emission≤0.22 mg/(m³·h)Helps maintain healthier indoor air quality
    Formaldehyde, benzene, tolueneNot detectedSupports enclosed-space applications

    These values should be understood as controllable product targets or typical tested ranges, depending on product model, installation system, and project requirements.

    Why Anti-Static Performance Matters

    For indoor and high-use facilities, anti-static performance brings several practical benefits:

    • Cleaner surface appearance: less dust attraction and easier daily cleaning
    • Improved user comfort: reduced risk of static discharge during contact
    • Better indoor air quality: less dust and no loose infill particles
    • More stable long-term experience: reduced static performance decay after aging
    • Lower maintenance pressure: less frequent deep cleaning compared with dusty infill systems

  • Full-Process Anti-Static Technology

    Molecular-Level Anti-Static Modification

    Vivaturf modifies both the turf yarn and backing materials at the raw material stage by incorporating environmentally responsible anti-static additives. These additives help improve controlled conductivity within the polymer matrix, allowing static charges generated by friction to dissipate more efficiently rather than accumulating on the surface.

    Nano-Level Additive Dispersion

    To ensure consistent performance, Vivaturf uses nano-scale dispersion technology, controlling anti-static additive particle size to approximately ≤50 nm. This helps distribute the additive uniformly throughout the yarn and backing materials, reducing the risk of localized static build-up.

    Fiber Matrix Friction Optimization

    Vivaturf’s non-infill turf uses a 7:3 straight-to-curled fiber matrix. The straight fibers provide structural support, while the curled fibers reduce excessive fiber-to-fiber friction and improve resilience. This structure helps lower static generation at the source while maintaining surface stability.

    Anti-Static Backing Integration

    Static control is not limited to the fiber layer. Vivaturf also applies anti-static treatment to the backing system, helping create a more continuous dissipation path across the turf structure.

    Heat-Bonded, Low-Odor Construction

    Vivaturf’s heat-bonded composite process reduces reliance on conventional glue layers that may interrupt conductivity or deteriorate over time. This also supports lower odor and lower VOC performance, which is especially important for indoor and climate-controlled sports facilities.

  • Installation and Quality Control Considerations

    To support mechanical performance, installation standards remain critical:

    • Sub-base tolerance: ≤3 mm over 3 m straightedge
    • Base strength: typically C25 or above
    • Seam bonding strength: ≥2.5 MPa
    • Edge reinforcement: recommended for long-term stability

    Field validation may include impact testing, vertical deformation measurement, and uniformity checks based on relevant standards such as GB/T 19851.11 or equivalent international references.

    Vivaturf in the European & North American Context

    In Europe and North America, artificial turf systems are increasingly evaluated based on:

    • Mechanical consistency across the field
    • Player safety and joint protection
    • Long-term durability under high-frequency use
    • Environmental compliance and low emissions

    Vivaturf’s integrated mechanical structure reflects these priorities, combining material engineering, structural design, and performance validation to meet the expectations of modern sports infrastructure.

    With expanding global adoption, Vivaturf has established a growing presence in international non-infill turf applications, particularly where consistent mechanical behavior and reduced maintenance are key decision factors.

  • Key Mechanical Performance Parameters

    Vivaturf’s system is designed to align with internationally recognized performance benchmarks (such as EN, FIFA-related references, and ASTM-based testing where applicable):

    Overall Mechanical Balance

    • Vertical deformation: ~5–8 mm
    • Shock absorption: ~40–55%
      These ranges support a balance between firmness and cushioning, often aligned with performance expectations in professional and training environments.

    Fiber-Level Mechanical Properties

    • Tensile modulus (straight fibers): ≥1200 MPa
    • Resilience (curled fibers): ≥95% recovery
    • Upright retention after repeated use (10,000 cycles): ≥95%

    These characteristics contribute to long-term surface consistency and reduced fiber fatigue.

    Shockpad Performance

    • Density: ~45 kg/m³
    • Closed-cell rate: ≥98%
    • Permanent deformation (70°C × 22h): ≤2%

    This helps maintain cushioning performance over time without significant structural collapse.

    Long-Term Performance Stability

    • Annual mechanical performance reduction: ≤2% (typical target range)
    • Extreme environment stability (humidity + freeze-thaw testing):
      Performance reduction ≤5% after extended exposure

    These figures may vary depending on installation conditions, usage intensity, and environmental factors.

    Environmental & Safety Indicators

    • Heavy metal migration: ≤0.3 mg/kg
    • TVOC emission: ≤0.22 mg/(m³·h)
    • Formaldehyde, benzene, toluene: not detected

    These parameters align with increasing environmental and indoor safety expectations in global markets.