Molecular-Level Anti-Static Modification
Vivaturf modifies both the turf yarn and backing materials at the raw material stage by incorporating environmentally responsible anti-static additives. These additives help improve controlled conductivity within the polymer matrix, allowing static charges generated by friction to dissipate more efficiently rather than accumulating on the surface.
Nano-Level Additive Dispersion
To ensure consistent performance, Vivaturf uses nano-scale dispersion technology, controlling anti-static additive particle size to approximately ≤50 nm. This helps distribute the additive uniformly throughout the yarn and backing materials, reducing the risk of localized static build-up.
Fiber Matrix Friction Optimization
Vivaturf’s non-infill turf uses a 7:3 straight-to-curled fiber matrix. The straight fibers provide structural support, while the curled fibers reduce excessive fiber-to-fiber friction and improve resilience. This structure helps lower static generation at the source while maintaining surface stability.
Anti-Static Backing Integration
Static control is not limited to the fiber layer. Vivaturf also applies anti-static treatment to the backing system, helping create a more continuous dissipation path across the turf structure.
Heat-Bonded, Low-Odor Construction
Vivaturf’s heat-bonded composite process reduces reliance on conventional glue layers that may interrupt conductivity or deteriorate over time. This also supports lower odor and lower VOC performance, which is especially important for indoor and climate-controlled sports facilities.
Leave a Reply